Thermostat housing w/O-ring, T3 Syncro, DG, MV, DJ, SS, 025 121 117E

Thermostat housing w/O-ring, T3 Syncro, DG, MV, DJ, SS, 025 121 117E  Please note that this Thermostat housing can be used on the 2.1 2WD Vanagon engine.  You will need these two Thermo switches: Temp II sensor, 1.9 engine & 2.1 Syncro engine, 025 906 041 and Temp gauge sensor, 1.9 engine & 2.1 Syncro engine, 049 919 501.  You will need to cut off the plug to the Temp gauge switch and using only the sender wire with an uninsulated female spade connector, the ground wire is not needed.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: